×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
why the FXS port relese time need 3 secs
×
Questions about A400/800/1200 Analog Interface Card
why the FXS port relese time need 3 secs
15 years 10 months ago #1258
by miaolin
You can try to modify the flash= in zapata.conf
it is default set to 750ms.
Are you sure the release time is 3 seconds?
15 years 10 months ago #1260
by kerry
thanks you respond,
I try do it tomorrow, and I'm sure the release time is 3 seconds.
other cause?
15 years 10 months ago #1261
by miaolin
You can try to use debug param when load wctdm, and see what happened in console when you offhook and onhook.
15 years 10 months ago #1262
by kerry
Sorry , I'm fledgling,
so Please tell me how to debug param when load wctdm?
thank you very match.
15 years 10 months ago #1264
by kerry
ok, I see the debug message when I offhook and onhook:
opvxa1200: Card 0 Going off hook
Setting FXS hook state to 1 (00)
opvxa1200: Card 0 Going on hook
Setting FXS hook state to 3 (00)
Setting FXS hook state to 0 (00)
this duration about 3 seconds.
What's problem and how do resolve ?
thanks.
15 years 10 months ago #1265
by kerry
pleasantly surprised:
This problem is resolve.
need set rxflash= ms in zapata.conf
thanks a lot!
Forum
Telephony Cards Support
A400/800/1200 Series
why the FXS port relese time need 3 secs
Time to create page: 0.033 seconds